In alignment with our commitment to transparency and integrity, we want to clearly disclose that product prices and descriptions may vary on the websites of our retail partners.
We encourage you to visit the retailer's site directly for the most current images, products, prices, and descriptions.
It's important to us that you're informed Zeppy may receive compensation for some listings featured on our site.
Additionally, we want to be upfront about our use of affiliate links; our affiliations, including but not limited to the eBay Partner Network, support our mission to provide valuable content and offerings to you.
Smallest mini Rotary Table for Milling operation with Table Diameter - 2.75 Inches (72 mm)
Height when lay Horizontal :1.5 Inches (39 mm )
Worm- Gear Ratio is 1: 48, which means that 1 handle rotation shall turn the table 7.5 degrees.
Most preferred choice of Watch makers, Jewelry Tools, Model Makers & Hobbyists.
(3" Inch (75 mm)Tilting Rotary Table)
Low Profile Precision Mini Rotary Table 3" 75mm is manufactured from Seasoned casting.
Worm- Gear Ratio - 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees.
Can be used both in horizontal & vertical position.
(4" Inch (100 mm)Tilting Rotary Table)
Brand New High Quality 4" /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any position.
Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
Center Height in vertical position: 2-5/8" (66 mm approx)
Hand wheel is graduated in divisions of 10 min & can be set to zero.
(3" inch 75mm Rotary Table)
Table diameter 80 mm (3") Table is graduated 360 Degrees.
Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
Center Height in vertical position without chuck: 2-5/8" (66 mm approx)
Hand wheel is graduated in divisions of 10 min & can be set to zero.
Can be mounted both in Horizontal & vertical position.
(4" Inch (100 mm) Rotary Table)
Brand New Very High Quality 4" /100 mm Regular Rotary Table designed for smaller milling machines.
Table is graduated 360 Degrees.
Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
Center Height in vertical position: 2-1/16" (50 mm approx)
Hand wheel is graduated in divisions of 10 min & can be set to zero.
Can be mounted both in Horizontal & vertical position.
(HV6 Rotary Table 6" /150MM - 4 Slot)
Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface.
Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm Horizontal Height : Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials.
This will fit both the Horizontal & Tilting model of HV4 & HV6 Rotary Tables
This Set includes Following: 2 x step blocks 2 x tee bolts. with flanged nut 2 x clamps Bolt Thread M8.
(HV4(110 MM) 3 slot Rotary Table)
Table Diameter is 110 mm with MT2 Bore .
Table Height when laid Horizontally 80 mm Worm -Gear Ratio is 1: 90 , which means 1 handle rotation turns the Table by 4 Degrees.
4-Jaws x 6"/ 150 mm Wood Lathe Chuck Threaded 3/4" x 16 with Independently Adjustable / Reversible Jaws.
Handwheel graduated in seconds.
2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
Can be clamped in Horizontal as well Vertical Position. Vernier scale calibrated to 10 seconds quick release system for manual indexing.
(HV6 3-Slot Rotary Table (150 mm -6" Inches)
Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks.
Precision ground chuck and overall smooth surface.
Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm Horizontal Height : Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials
Graduated 360 degree around its circumference.
(New 3'' 80mm Tilting Rotary Table)
Low Profile Precision Mini Rotary Table 3" /80 mm is manufactured from Seasoned casting.
Worm- Gear Ratio - 36:1, which means that the 1 rotation of the handle shall rotate the table by 10 degrees. Designed to tilt between 0- 90 Degrees & can be locked at any position.
Zero dial is marked in 10 minutes divisions.
Table scale is calibrated in 5 degree increments.
Height when laid horizontally 60 mm.
Grub screw on the base plate for dialing the Rotary accurately when laid horizontal.
(4" Inch 4-Slot Tilting Rotary Table MT2 Bore)
WINDING HANDLE IS GRADUATED 0-10 DEGREES IN 5 MINUTE DIVISIONS,WHICH CAN BE DISENGAGED EASILY FOR FREE ROTATION OF THE TABLE.
TABLE IS GRADUATED 0-360 DEGREES IN 5 DEGREE DIVISIONS,
HEIGHT WHEN LAID HORIZONTAL IS 64 MM APPROX.
(4" Inch 3-Slot Tilting Rotary Table MT2 Bore)
QUALITY PRECISION 4" /100 MM TILTING ROTARY TABLE-MT2 BORE.
WORM GEAR RATIO IS 1: 72, WHICH MEANS 1 HANDLE ROTATION SHALL TURN THE TABLE BY 5 DEGREE.
WINDING HANDLE IS GRADUATED 0-10 DEGREES IN 5 MINUTE DIVISIONS,WHICH CAN BE DISENGAGED EASILY FOR FREE ROTATION OF THE TABLE.
TABLE IS GRADUATED 0-360 DEGREES IN 5 DEGREE DIVISIONS,
T-SLOTS 5/16" WIDE, TILTS UP TO 90 DEGREES WITH A SCALE MARKED IN 1 DEGREE GRADUATIONS,
Disclaimer: Prices and descriptions maybe different on retailers sites, please check the retailers website for the latest images / products / prices and descriptions. Zeppy maybe compensated for some of these listings.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Wait a moment... we're getting more products!
uk 
fr
de
es
it
us
ca
